Discussions relating to Turbochargers, Superchargers, Induction, Engine Mods, Exhaust Mods, and other items specifically to make your MX5 or Roadster put out more power.
Moderators: Growler, jif, SLYDIT, Born_disturbed
-
DeeCee
- Tentative sideways sliding....
- Posts: 36
- Joined: Mon Jun 07, 2010 2:27 pm
- Location: Auckland
Post
by DeeCee » Sat May 26, 2012 7:23 pm
I am considering doing the cam timing mod to my NA6C but have not been able to find a link to any instructions about how to do this.
Can anyone help me ?
Thanks
-
DeeCee
- Tentative sideways sliding....
- Posts: 36
- Joined: Mon Jun 07, 2010 2:27 pm
- Location: Auckland
Post
by DeeCee » Sat May 26, 2012 8:18 pm
Thanks sprsta, I am onto that one.
The mod I am referring to changes the inlet and exhaust cam timing by swapping the timing gears (from memory)
-
SLYDIT
- Keep calm, Forum Moderator here.
- Posts: 1610
- Joined: Sun May 21, 2006 6:18 pm
- Location: In the Garage.
Post
by SLYDIT » Sat May 26, 2012 9:43 pm
its called the "exhintake" mod or something similar.
i remember it was only for one engine type...can't remember if it was the 1600 or 1800
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002
-
DeeCee
- Tentative sideways sliding....
- Posts: 36
- Joined: Mon Jun 07, 2010 2:27 pm
- Location: Auckland
Post
by DeeCee » Sat May 26, 2012 10:23 pm
Yes you are correct SLYDIT, I finally found some more info and seems it applies to the 1.8 engine, not the 1.6.
-
Angreal
- I have stars, you haven't. Deal with it
- Posts: 1621
- Joined: Tue Feb 03, 2009 10:13 pm
- Location: At the pub
Post
by Angreal » Sun May 27, 2012 10:45 am
Speaking of exhintakes... Could anyone point me in the right direction for obtaining a reasonably priced exhaust camshaft?
-
REDBEN
- I count 5-s in my sleep
- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Sun Jun 03, 2012 1:14 pm
Angreal wrote:Speaking of exhintakes... Could anyone point me in the right direction for obtaining a reasonably priced exhaust camshaft?
Give Henry a call at Auckland Cams 0274860400, He's the lead Techie at ACL and will have a range of options available.
-
Angreal
- I have stars, you haven't. Deal with it
- Posts: 1621
- Joined: Tue Feb 03, 2009 10:13 pm
- Location: At the pub
Post
by Angreal » Fri Jul 13, 2012 5:38 am
Can anyone also recommend a place to do the timing bump on my car?
-
sprsta
- I have stars, you haven't. Deal with it
- Posts: 1024
- Joined: Mon Aug 25, 2008 6:11 pm
- Location: auckland
Post
by sprsta » Fri Jul 13, 2012 8:03 am
ill do it if you like
-
Angreal
- I have stars, you haven't. Deal with it
- Posts: 1621
- Joined: Tue Feb 03, 2009 10:13 pm
- Location: At the pub
Post
by Angreal » Fri Jul 13, 2012 8:50 am
sprsta wrote:ill do it if you like
Sweet. I'll pop by in a couple weeks dependant on whenever my container arrives with the bushings and exhaust
-
halberd
- Need, more, 5-ing, time....
- Posts: 104
- Joined: Fri Jun 01, 2012 12:43 pm
Post
by halberd » Fri Jul 13, 2012 10:07 am
Angreal wrote:sprsta wrote:ill do it if you like
Sweet. I'll pop by in a couple weeks dependant on whenever my container arrives with the bushings and exhaust
I'm also interested, if you are interested in doing it for me. How much would it cost?
'91 Eunos Roadster
Return to “MX5 Power & Power Mods”
Who is online
Users browsing this forum: No registered users and 17 guests