Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
HK_Fooey
- Hey. They are NOT Training wheels.

- Posts: 12
- Joined: Sun Jan 20, 2013 4:58 pm
- Location: New Zealand
Post
by HK_Fooey » Tue Feb 19, 2013 10:35 pm
Fitted new plugs and an ebay lip

-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Fri Feb 22, 2013 12:30 am
Went for a cruise with about 8 other cars down to hamilton. Should get some rolling shots from it tomorrow
1990 NA6C MX5
-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Fri Feb 22, 2013 8:28 pm
Rolling shot as mentioned above.
Also gave the car a polish today to try combat the rear fading.
Came out alright but the hardtops paint is beyond repair.

1990 NA6C MX5
-
sprsta
- I have stars, you haven't. Deal with it

- Posts: 1024
- Joined: Mon Aug 25, 2008 6:11 pm
- Location: auckland
Post
by sprsta » Fri Feb 22, 2013 10:07 pm
took Hayley's car into work today for a wheel alignment
all within certifiable spec at this height
i gotta say the ISC offset bushes were a good investment
just gotta get the starsharks on now
wich means cutting out the guards and fitting the flares
then the side skirts

-
authentic
- I have stars and not afraid to use them

- Posts: 277
- Joined: Wed Jun 06, 2012 8:45 pm
- Location: Wellington
Post
by authentic » Fri Feb 22, 2013 10:08 pm
I put these on because I'm a wannabe track car
And I've finally replaced every bulb in my car (except for headlights, fog lights and number plate lights) with LEDs.
-
brownie
- I count 5-s in my sleep

- Posts: 408
- Joined: Wed Mar 26, 2008 10:19 pm
- Location: CH CH
Post
by brownie » Sat Feb 23, 2013 12:42 pm
Changed the strut brace,From factory Mazda one to a Mazdaspeed one,just in from Japan,Was completely scoured up on the alloy bar,hit it with 2000 wet and dry and some autosol, Come up pretty good i thought
-
Attachments
-

-

-
fiveisalive
- Tentative sideways sliding....

- Posts: 40
- Joined: Sat May 21, 2011 5:26 pm
Post
by fiveisalive » Sat Feb 23, 2013 1:56 pm
I've just installed NB2.5 seats in my NB6C, and I feel like i'm on stilts... do they sit higher than the normal seats?

-
warrior
- I only think 5.

- Posts: 989
- Joined: Wed Oct 06, 2010 7:11 pm
- Location: auckland
Post
by warrior » Sat Feb 23, 2013 4:47 pm
Went to pick up my son from archery at Mt albert, found out (along with the 25 cars behind me) that my car is WAY to low for the speedbumps up there.

warrior
-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Sun Feb 24, 2013 8:37 pm
Had an epic day down at Hampton Downs today on the skid pad, first time drifting with the coilovers and they really helped.
Tyres still arent worn out

mustn't have been trying hard enough.
Passenger side wing mirror glass fell out after my first run

, only found it at the end of the day, unfortunately it was smashed.
Anyone got a spare passenger mirror they want to part with?
Now want to get 194/45 tyres to prevent guard rub and some sort of steering lock mods.

1990 NA6C MX5
-
dylann
- Need, more, 5-ing, time....

- Posts: 190
- Joined: Sat Jul 07, 2012 11:58 pm
Post
by dylann » Sun Feb 24, 2013 9:43 pm
I might have the some mirrors to part with in the next couple of weeks if you are willing to wait that long :p
Getting some of those 'race mirrors' on the tard, just have to find my debit card to pay for them

-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Sun Feb 24, 2013 10:14 pm

you've changed my mind, going with race mirrors instead.
Thanks for that

1990 NA6C MX5
-
Mr. Shine
- I am quitting my job and going 5-ing

- Posts: 599
- Joined: Mon Feb 07, 2011 11:12 pm
Post
by Mr. Shine » Mon Feb 25, 2013 12:10 pm
Pretty sure I've got a mirror somewhere, though the joints are probably dodgy. Glass certainly is fine, though!
Free anyway if you want it over race mirrors

-
dylann
- Need, more, 5-ing, time....

- Posts: 190
- Joined: Sat Jul 07, 2012 11:58 pm
Post
by dylann » Mon Feb 25, 2013 6:24 pm
Hacked a new spot for my number plate, very unfinished at the moment but it will be done one day, needed to do it for a wof
Sacrificed an mr2 bumper for the mount etc. Started with a clean bumper, cut a hole. Super hot glued the fuck out of it.
And basically the only reason i did this, number plate lights!
Finished product, hopefully it grows on me cause i think it looks a little odd.
Speaking of breaking mirrors, i broke my drivers side mirror today. go figure.
-
Furai
- I have stars, you haven't. Deal with it

- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Mon Feb 25, 2013 6:45 pm
Nice door cards.
-
Snapfrozen
- I am quitting my job and going 5-ing

- Posts: 747
- Joined: Sun Jun 24, 2012 11:58 am
Post
by Snapfrozen » Mon Feb 25, 2013 7:07 pm
siren676 wrote:Had an epic day down at Hampton Downs today on the skid pad, first time drifting with the coilovers and they really helped.
Tyres still arent worn out

mustn't have been trying hard enough.
Passenger side wing mirror glass fell out after my first run

, only found it at the end of the day, unfortunately it was smashed.
Anyone got a spare passenger mirror they want to part with?
Now want to get 194/45 tyres to prevent guard rub and some sort of steering lock mods.

You did really well for a first timer!
-
tomtikki
- I have stars and not afraid to use them

- Posts: 239
- Joined: Sat Oct 01, 2011 9:26 am
- Location: Auckland, NZ
Post
by tomtikki » Mon Feb 25, 2013 7:11 pm
Bumper looks pretty good! -and loving those door cards dude.
I'm not crazy, my mother had me tested.
-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Mon Feb 25, 2013 7:44 pm
Snapfrozen wrote:You did really well for a first timer!
*2nd time on the pad
Will try get down to the next one if im not working, really want to finish off the tyres

1990 NA6C MX5
-
Furai
- I have stars, you haven't. Deal with it

- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Mon Feb 25, 2013 8:00 pm
siren676 wrote:Snapfrozen wrote:You did really well for a first timer!
*2nd time on the pad(Plus Meremere

)
Will try get down to the next one if im not working, really want to finish off the tyres

Fixed it
Was a great day trying to upload now.
-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Mon Feb 25, 2013 8:09 pm

Damn it i forgot to mount my camera in my car
Oh well theres been quite a few pics people have posted for a change.
1990 NA6C MX5
-
stooji
- Hey. They are NOT Training wheels.

- Posts: 15
- Joined: Sat Mar 24, 2012 4:07 pm
- Location: auckland, New Zealand
Post
by stooji » Mon Feb 25, 2013 8:17 pm
-
MrGrey
- I have stars, you haven't. Deal with it

- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
Post
by MrGrey » Mon Feb 25, 2013 8:22 pm
OMFG a strider has stolen your engine!
SOMEBODY CALL GORDON FREEMAN ASAP!
-
stooji
- Hey. They are NOT Training wheels.

- Posts: 15
- Joined: Sat Mar 24, 2012 4:07 pm
- Location: auckland, New Zealand
Post
by stooji » Mon Feb 25, 2013 8:31 pm
+1 karma ^
-
siren676
- I have stars, you haven't. Deal with it

- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Mon Feb 25, 2013 8:53 pm
Wait a minute. Are you rollaholic from toyspeed?
1990 NA6C MX5
-
mattapo
- See my 5 and raise you.

- Posts: 53
- Joined: Sat Nov 17, 2012 10:11 am
- Location: waikato
Post
by mattapo » Mon Feb 25, 2013 8:59 pm
MrGrey wrote:OMFG a strider has stolen your engine!
SOMEBODY CALL GORDON FREEMAN ASAP!
pure awesomeness
-
REDBEN
- I count 5-s in my sleep

- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Mon Feb 25, 2013 9:29 pm
stooji wrote:
I will also be looking at the same sight this weekend so I can put my dumby fabrication block in, also a Blue car

Return to “MX5 Discussion”
Who is online
Users browsing this forum: Google [Bot] and 17 guests