Wheel Spacer help

warrior · Post by **warrior** » Tue Sep 11, 2012 11:32 am

Has anyone got any 15mm spacers (or maybe some other width) I could borrow? I would like to get a little more width in my car but it is quite low so just want to borrow some spacers before I buy to make sure the wheels wont rub......anyone? please?

warrior · Post by **warrior** » Tue Sep 11, 2012 11:33 am

For a na. Cheers

WideOpenThrottle · Post by **WideOpenThrottle** » Tue Sep 11, 2012 11:57 am

Washers or wheel nuts??? dont drive it tho!!

Keith Jones · Post by **Keith Jones** » Tue Sep 11, 2012 2:48 pm

I've got a couple of 10mm spacers you could borrow.
However, even they need longer studs. So as Gary said, don't drive it.

sprsta · Post by **sprsta** » Tue Sep 11, 2012 3:07 pm

i have some 15mm ones you can try but the hub bore is too big for an mx5 but they will likely fit if you have aftermarket wheels

warrior · Post by **warrior** » Tue Sep 11, 2012 3:32 pm

sprsta.......I do have aftermarket wheels. Do you know the size of the bore so I can check if they will work? I had some for my MR2 and they did not need longer studs as they were the type that bolts onto the hub....are these the same as that? I need to drive with them on to make sure they dod not rub etc over bumps

sprsta · Post by **sprsta** » Wed Sep 12, 2012 6:54 pm

the bore diameter is 75mm they are bolt on's

warrior · Post by **warrior** » Wed Sep 12, 2012 9:30 pm

Cheers, I will pm you

Wheel Spacer help

Wheel Spacer help

Who is online