Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
Furai
- I have stars, you haven't. Deal with it

- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Sat Feb 18, 2012 7:09 pm
So i lost a screw off the Airfoil wiper thing on the windscreen wiper arm and Its gone under the bonnet down behind the front quater on the drivers side. I cant find it and its a 3.5mm screw about 8mm long.
I cant seem to find them anywhere does anyone know a place? A whole new arm is $67GBP and I just want the airfoil thing all bolted down. Even some hex head button top screws would be great!
-
Euen
- I am quitting my job and going 5-ing

- Posts: 619
- Joined: Tue May 23, 2006 9:42 am
- Location: North Shore
Post
by Euen » Sat Feb 18, 2012 8:15 pm
Where are you? We can suggest places but there is not much point if you are not in the area.
TG Sports, classic roadster - modern technology. NA1800, 99 head, 11:1 +2mm Wiseco pistons, Link LEM, Alloy f/wheel, JR headers.
-
Furai
- I have stars, you haven't. Deal with it

- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Sat Feb 18, 2012 9:03 pm
Im on the Shore in Auckland
-
2low2c
- Need, more, 5-ing, time....

- Posts: 153
- Joined: Thu Feb 28, 2008 8:35 pm
- Location: north shore
Post
by 2low2c » Sat Feb 18, 2012 9:37 pm
it will not be 3.5 mm it will be ether 3mm or 4mm ,or it could be imperial
on the shore your best bet would be The bolt shop on archers rd .
-
brownie
- I count 5-s in my sleep

- Posts: 408
- Joined: Wed Mar 26, 2008 10:19 pm
- Location: CH CH
Post
by brownie » Sat Feb 18, 2012 9:51 pm
I believe a good Mazda parts specialist has a add running here in classifieds,They might be able to help.
(Will be of more help than the CR forum in the states)

-
Euen
- I am quitting my job and going 5-ing

- Posts: 619
- Joined: Tue May 23, 2006 9:42 am
- Location: North Shore
Post
by Euen » Sat Feb 18, 2012 9:59 pm
+1 to the Bolt Shop. Won't be open again till Monday now though.
My ones are M3.5 x0.6 x 5mm long with a captive spring washer.
Good luck
TG Sports, classic roadster - modern technology. NA1800, 99 head, 11:1 +2mm Wiseco pistons, Link LEM, Alloy f/wheel, JR headers.
-
Furai
- I have stars, you haven't. Deal with it

- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Sun Feb 19, 2012 8:07 am
Thanks guys ill try them.
-
ross
- See my 5 and raise you.

- Posts: 91
- Joined: Sun Jun 10, 2007 10:53 am
Post
by ross » Sun Feb 19, 2012 1:01 pm
I have one you can have.
Ross.
www.mx5mart.
Return to “MX5 Discussion”
Who is online
Users browsing this forum: No registered users and 18 guests