Wheel spacers??

Exocet kit cars · Post by **Exocet kit cars** » Tue Jul 05, 2011 5:57 pm

Has anyone had experience of where to get 32 mm wheel spacers in NZ? I've been quoted NZ$110 postage from the UK!

sprsta · Post by **sprsta** » Tue Jul 05, 2011 7:41 pm

crikey what size/width/offset wheels will you be running?
i dont even think you can certify more than 25mm
is this for one of those porsche things?
you could probably get a set made or Ryan at luxury sports can do 27mm i think

Exocet kit cars · Post by **Exocet kit cars** » Tue Jul 05, 2011 8:19 pm

Good point re: certification - I'll have to run that past the certifier I think.
32 mm is the standard size that goes on the Exocet (dot co dot nz) - improves the stance.
These go on with the standard MX5 alloys.
Cheers!

sprsta · Post by **sprsta** » Tue Jul 05, 2011 8:47 pm

how about some of these
http://www.palmside.co.nz/product_pcid_15633.html

then you can use the wheels to get the offset rather than running some super large spacers

they can do between 15x6 and 15x9
you could even go for some 13x8/9s if you use 1.6 brakes

basicly a six inch rim with +11 offset will work you can work out the widths/offsets from there

even try http://www.palmside.co.nz/product_pcid_15633.html

hope this helps

aidwano · Post by **aidwano** » Wed Jul 06, 2011 6:28 pm

You can't cert 32mm spacers. http://www.lvvta.org.nz/documents/stand ... _Tyres.pdf

Definately get some different wheels.

sprsta · Post by **sprsta** » Wed Jul 06, 2011 7:29 pm

if your wanting to do the kit car thing Neil Fraser is the man to talk to

http://www.fraser.co.nz/

Exocet kit cars · Post by **Exocet kit cars** » Thu Jul 07, 2011 10:10 pm

Thanks for the advice. I'll either go for a 20 mm spacer or look at some new wheels.

Wheel spacers??

Wheel spacers??

Wheel spacers

Wheel Offset

Who is online