Auxillary drive belt query

Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.

Moderators: LilRay.Sun, Furai, Growler, zorruno, jif

Post Reply
dynofiend
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 159
Joined: Sat Jun 21, 2008 6:26 pm

Auxillary drive belt query

Post by dynofiend » Thu Jul 31, 2008 9:51 pm

Hi there,

Ive recently removed the AC and PAS from my NA6 and wondered how/if the pulley attached to the crank that drove them, is detachable seperately from the pulley that powers the rest of the pulleys on the front of the block (water pump and alternator?). It looks like there are 4 bolts to undo, but im not sure if that will either dettach the whole thing, or mess up the timing.

Can I just remove this now redundant pulley?
Top
Growler
Yes. I might just know (Trusted Advisor)
Yes. I might just know (Trusted Advisor)
Posts: 433
Joined: Sat May 06, 2006 8:25 pm
Location: Auckland

Post by Growler » Thu Jul 31, 2008 10:10 pm

Unfortunately they are one piece.
You can undo the four bolts and take it off with no consequences at all.
The pull only goes on one way so there are no issues in putting it back incorrectly either.
Top
dynofiend
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 159
Joined: Sat Jun 21, 2008 6:26 pm

Post by dynofiend » Mon Aug 04, 2008 6:58 pm

Thanks for the reply :)
Top
Post Reply

Return to “MX5 Discussion”

Who is online

Users browsing this forum: No registered users and 29 guests