Gearbox Gaiter

[RD5T3R]

Greetings All
We have obtained the bits for the gearbox gaiter repair from Ross but are
there any issues I should be aware of before I start?

I know the gear lever is screwed on (BRG V Spec) from underneath somehow so
the rest is just a remove and replace?

Any hints or a idiots guide greatly appreciated

Cheers

Stu n Viv
RD5T3R

[carl.halvorsen]

Presumably you have a Nardi wood gear knob on your BRG V spec. There will be a small grub screw through the metal base of the knob. You will need the correct size allen key to unscrew it.Then you simply unscrew the knob off the lever.>

From: "Stuart Gross" <stugross@ihug.co.nz>
Date: 2006/03/13 Mon PM 04:07:25 GMT+13:00
To: "MX5List" <mx5list@mx5club.org.nz>
Subject: Gearbox Gaiter

Greetings All
We have obtained the bits for the gearbox gaiter repair from Ross but are there any issues I should be aware of before I start?

I know the gear lever is screwed on (BRG V Spec) from underneath somehow so the rest is just a remove and replace?

Any hints or a idiots guide greatly appreciated

Cheers

Stu n Viv
RD5T3R

Regards,
Carl.
Greetings AllWe have obtained the bits for the gearbox gaiter repair from
Ross but are there any issues I should be aware of before I start? I know
the gear lever is screwed on (BRG V Spec) from underneath somehow so the
rest is just a remove and replace? Any hints or a idiots guide greatly
appreciated Cheers Stu n Viv
RD5T3R

[Ross Bryon]

Yes, and when you put the knob back on make sure to use LokTite on
the allen grub screw or it will always be loosening on you!


Ross Bryon
1991 BRG V-Spec Roadster | OL MAN |
Auckland


On 13 Mar 2006, at 5:00 PM, <carl.halvorsen@xtra.co.nz>
<carl.halvorsen@xtra.co.nz> wrote:

[...]