Oil feed for turbo

WideOpenThrottle · Post by **WideOpenThrottle** » Mon May 17, 2010 2:10 pm

Because my NA6C now has a turbo just how do i get oil feed for it?
Also can you purchase a sump oil return fitting anywhere?

Keith Jones · Post by **Keith Jones** » Mon May 17, 2010 5:12 pm

There is a plug into an oil gallery at the back of the block by the dipstick.
I made up a fitting to go in here as it's close to the turbo.

I've got a few fittings that might do for the sump return. I'll check tonight.
Is the engine in the car yet as it's a fiddly job drilling and tapping the sump if it is?

sprsta · Post by **sprsta** » Mon May 17, 2010 6:35 pm

http://www.miataturbo.net/showthread.ph ... post573401

see post #29

i got all of my fittings from ENZED

http://www.fpp.co.nz/products/fragola_h ... tings.aspx

i used a fitting with a tapered thread in the sump

WideOpenThrottle · Post by **WideOpenThrottle** » Mon May 17, 2010 7:24 pm

Yep just to make it awkward the engine is in the car

Thanks Keith i will wait to see what you have before i visit ENZED or say Waitemata Hydraulics so thanks to you as well sprsta

Oil feed for turbo

Oil feed for turbo

Who is online