HOWTO: Installing Aftermarket Seats (with photos)

Replacing factory parts, beautifying, personalising or otherwise customising your MX5 or Roadster.

Moderators: LilRay.Sun, Growler, jif

Post Reply
WRW
See my 5 and raise you.
See my 5 and raise you.
Posts: 69
Joined: Wed May 31, 2006 3:04 pm
Location: By the Beach

HOWTO: Installing Aftermarket Seats (with photos)

Post by WRW » Wed Aug 02, 2006 5:57 pm

Got my new seats installed for the StripeMonster. There were a few surprises along the line (as in the driver seat's rails not being the same distance apart as the passenger seat's) And speaking of rails, the MX5 rails were way too narrow for this seat, so the solution was to bolt an aluminium plate on the original rails, then mount the seats on the plate.
Many many thanks to Greg at The Seatwarehouse (www.seatwarehouse.co.nz) who not only gave me a great price on the seats, he also sacrificed half a Sunday to help me get them mounted in my car.

The seats I got

They also look stunning in blue

A few photos from the process:
Measuring my stock seats
Image

Passenger seat removed... Where's the vacuum cleaner????
Image

Measuring the rails... very important, they differ even top to bottom!
Image
Image

Testing the seat on the passenger side to make sure it will fit. It is a very close fit...
Image

Mounting the rails on the plate
Image

Rails and plate fitted to the passenger seat
Image

Stock seat vs new seat
Image

The measurements between the rails (D= Drivers seat, P= Passenger) A bit of difference there. Luckily, no holes were drilled before it was measured...
Image

Finally... seats are in!
Image
Image

They are wonderfully snug and supportive. Makes me corner even faster.. :shock: :lol:

I'll take some better pics of the final result, but photos simply don't do them any justice!
Nina
-------------------
Where am I going and why am I in this handbasket?

SLYDIT
Keep calm, Forum Moderator here.
Keep calm, Forum Moderator here.
Posts: 1610
Joined: Sun May 21, 2006 6:18 pm
Location: In the Garage.

Post by SLYDIT » Wed Aug 02, 2006 6:29 pm

Geez Nina, i hope you vaccumed that carpet under the seats before install!!!!! LOL i bet all that change found under the seats paid for the upgrade?????
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002

WRW
See my 5 and raise you.
See my 5 and raise you.
Posts: 69
Joined: Wed May 31, 2006 3:04 pm
Location: By the Beach

Post by WRW » Wed Aug 02, 2006 6:36 pm

Yep, just in time before it's not legal tender anymore :wink:
Nina
-------------------
Where am I going and why am I in this handbasket?

m ex 5
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 40
Joined: Sun Jul 09, 2006 7:16 pm
Location: Marlborough

Aftermarket seats

Post by m ex 5 » Thu Aug 03, 2006 6:02 am

omg............please don't tell me they are going to outlaw that as well. sorry if I haven't been following this, but what make are the seats? I am going to have to get some for my baby one day and was thinking some (most) of the aftermarket seats apart from looking garish, are kinda wide :-(........

[Posted via External Email]
  • Finally found MINE
  • 99 Roadster RS Titanium Grey

zippy2
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 48
Joined: Mon Jul 10, 2006 9:44 am
Location: Masterton

Post by zippy2 » Thu Aug 03, 2006 1:05 pm

do you need to get these certed ? they use the original rails, however are not mounted direct to them. my race seat, directly mounted to the original rails and mounting points on the car needs a cert (to get a wof).

41south
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 35
Joined: Mon May 22, 2006 8:06 am
Location: Calm, dry Wellington

Aftermarket seats

Post by 41south » Thu Aug 03, 2006 1:25 pm

You mean somebody actually looks under there?



[Posted via External Email]
Colin

Silver 1992 NA
DCE973

WRW
See my 5 and raise you.
See my 5 and raise you.
Posts: 69
Joined: Wed May 31, 2006 3:04 pm
Location: By the Beach

Post by WRW » Thu Aug 03, 2006 2:47 pm

zippy2 wrote:do you need to get these certed ? they use the original rails, however are not mounted direct to them. my race seat, directly mounted to the original rails and mounting points on the car needs a cert (to get a wof).
These are not race seats tho... but I was told that as long as you use the original rails and mounting points it is perfectly legal, and no problem getting a WoF. Ie no certing needed.

I will know for sure in September when my WoF expires
Nina
-------------------
Where am I going and why am I in this handbasket?

WRW
See my 5 and raise you.
See my 5 and raise you.
Posts: 69
Joined: Wed May 31, 2006 3:04 pm
Location: By the Beach

Re: Aftermarket seats

Post by WRW » Thu Aug 03, 2006 2:50 pm

m ex 5 wrote:omg............please don't tell me they are going to outlaw that as well. sorry if I haven't been following this, but what make are the seats? I am going to have to get some for my baby one day and was thinking some (most) of the aftermarket seats apart from looking garish, are kinda wide :-(........
I don't recall the brand right away, but have a look at http://www.seatwarehouse.co.nz that's where I got them from
Nina
-------------------
Where am I going and why am I in this handbasket?

poison
Keep calm, Forum Moderator here.
Keep calm, Forum Moderator here.
Posts: 530
Joined: Sun Jun 11, 2006 7:47 pm
Location: JAFA Land

Aftermarket seats

Post by poison » Thu Aug 03, 2006 3:39 pm

Look up on the LTSA website, it’s pretty good. For example there is a whole section on seats
 
http://www.landtransport.govt.nz/rules/ ... -2002.html
 
Good Luck
 
Gazza




[Posted via External Email]
:twisted: Gazda in the white HOT Mazda :twisted:

zorruno
Black is the new black.
Black is the new black.
Posts: 601
Joined: Thu Apr 13, 2006 11:20 pm
Location: An Eastern Beach

Aftermarket seats

Post by zorruno » Thu Aug 03, 2006 5:29 pm

on 2/08/2006 6:36 p.m. WRW wrote:
> Yep, just in time before it's not legal tender anymore

on 3/08/2006 6:05 a.m. m ex 5 wrote:
> omg............please don't tell me they are going to outlaw that as
> well. sorry if I haven't been following this...

...and I think some of you may be getting confused when Nina said "Not
Legal Tender". If you read the full thread, she was talking about the
money under the seats... Nothing to do with seats being certified or not.

Incidentally, great install report and pics, thanks Nina.

[Posted via External Email]
(z)

WRW
See my 5 and raise you.
See my 5 and raise you.
Posts: 69
Joined: Wed May 31, 2006 3:04 pm
Location: By the Beach

Post by WRW » Thu Aug 03, 2006 7:47 pm

Hehe, yeah. I was talking about the coins that usually live under the seats, mainly 5 cent coins :lol:

And I hereby urge others to post their pics and stories of having modded/fixed something on their cars. It doesn't have to be anything big.

Next time I clean the drains behind the seats/by the jackpoints I'll try to remember to take pics and post them. (Unless somebody beats me to it) When I was going to do that for the first time, I was completely mystified by exactly where them darn drain holes were, let alone where to shove that bottle brush that I had attached to a long piece of wire.

Maybe this forum should have a 'garage' section like M-net has? Good for newcomers to the Fabulous Five. Just a thought anyway
Nina
-------------------
Where am I going and why am I in this handbasket?

Blues Boy
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 13
Joined: Fri Aug 04, 2006 3:01 am
Location: Mount Maunganui

Post by Blues Boy » Fri Aug 04, 2006 3:37 am

The seats look good! :wink: :D
Dave

WRW
See my 5 and raise you.
See my 5 and raise you.
Posts: 69
Joined: Wed May 31, 2006 3:04 pm
Location: By the Beach

Post by WRW » Fri Aug 04, 2006 9:59 am

Yowza! About time you stopped lurking Dave :lol:
Nina
-------------------
Where am I going and why am I in this handbasket?

Blues Boy
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 13
Joined: Fri Aug 04, 2006 3:01 am
Location: Mount Maunganui

Post by Blues Boy » Fri Aug 04, 2006 11:36 am

Yeye... It's all your fault. ;) :P
Dave

Dr Evil
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 3
Joined: Sun Jul 16, 2006 6:40 pm
Location: Hawkes Bay

Post by Dr Evil » Thu Aug 10, 2006 5:14 pm

Hi Nina. Yes the seats look great. And yes, more "how-to" stuff is a great idea.

Miatamad
Keep calm, Forum Moderator here.
Keep calm, Forum Moderator here.
Posts: 139
Joined: Fri May 19, 2006 9:32 am

Post by Miatamad » Tue May 29, 2007 10:30 am

MOD Edit:

To anyone changing to aftermarket seats:

You should be aware that modifications to the seat mounts may require certification.

I believe (but am seaking clarification) that as long as you use the original runners and bolt directly to the seats bracket you do not require a cert.

However with the addition of any mounting plate, change in mounting points etc you will.

Chris
Like my post? Give me Karma!
Boosted. Scary fast.

Trevor
See my 5 and raise you.
See my 5 and raise you.
Posts: 72
Joined: Wed May 02, 2007 8:33 pm
Location: Auckland

Post by Trevor » Wed Oct 17, 2007 9:12 pm

I am looking for an improved drivers seat and wonder if there have been any recent developments in this area, since this thread last concluded.

I have reduced the OEM seat squab thickness, but I would like to be even lower. I have also considered removing centre padding from the middle back, in order to sink deeper and improve the lateral support.

However my current thoughts are that modifications will not result in a properly satisfactory outcome, as the seat is just to small overall. In particularly the squab is to short to provide adequate support of the full thighs. In this respect I appreciate that available space is at a minimum and not many of the available accessory seat are likely to fit.

Any advice as to suitable makes and models, will be very much appreciated.

Trevor. *<)
Trevor.

As a child, on cold mornings I was happy to warm my cold feet in a cow pat, but I detest bull$hit. LOL

Post Reply

Return to “Customising and Personalising your MX5”

Who is online

Users browsing this forum: No registered users and 1 guest