Hi folks, do iv just replaced the head gasket on my 1800 98 mx5, now i cant get it to start.
Iv checked the timing 5 times, all good but when i put the plastic cover on and then the crank pulley ,the marks are way off the pointer.
Any ideas
Timing issue
Moderators: LilRay.Sun, Growler, jif
-
- I count 5-s in my sleep
- Posts: 329
- Joined: Thu Jul 06, 2006 6:30 pm
- Location: Waiuku
Re: Timing issue
It looks as if you have done everything correct with the timing.
The cams and crank are aligned correctly and the T on the plastic cover is lining up with the TDC notch on the pulley.
So the reason it isn't starting must be elsewhere.
Have you checked that it has a spark when cranking and that it it getting fuel OK?
The cams and crank are aligned correctly and the T on the plastic cover is lining up with the TDC notch on the pulley.
So the reason it isn't starting must be elsewhere.
Have you checked that it has a spark when cranking and that it it getting fuel OK?
Who is online
Users browsing this forum: No registered users and 4 guests