Paint my wheels
Paint my wheels
I have purchased some M style wheels for my 1990 from Trade me and have had
the polished. They look superb but before I put them on the car I need to
have the wheels lacquered.
Who in Auckland should I go to? Somewhere near to Remuera would be good.
Cheers
Don
the polished. They look superb but before I put them on the car I need to
have the wheels lacquered.
Who in Auckland should I go to? Somewhere near to Remuera would be good.
Cheers
Don
1990 NA with a 1.8 conversion SOLD
2005 NC Limited edition 2470/3500 6MT
2005 NC Limited edition 2470/3500 6MT
Paint my wheels
Hi Don
I'd avoid getting the wheels lacquered - I got polished aluminum ones years ago and found that an annual polish keeps them looking smart, I got professional advice from my panelbeater who stated that lacquer is bloody hard to remove and reapply if it gets scratched!
Peter
DRGN1
I'd avoid getting the wheels lacquered - I got polished aluminum ones years ago and found that an annual polish keeps them looking smart, I got professional advice from my panelbeater who stated that lacquer is bloody hard to remove and reapply if it gets scratched!
Peter
DRGN1
Paint my wheels
I'll second that, I had laquered wheels on a Holden I had a few years ago,
looked great when I got the car, but a year later they looked just awful, and
almost impossible to do anything about it
Eric
looked great when I got the car, but a year later they looked just awful, and
almost impossible to do anything about it
Eric
-
- Keep calm, Forum Moderator here.
- Posts: 530
- Joined: Sun Jun 11, 2006 7:47 pm
- Location: JAFA Land
Paint my wheels
How about clear powder coat??? Hard as nails, I have no experience with this
on wheels but just chucking in an idea...
Depending on the design/shape of the wheel, and annual polish may turn out to
be a major amount of work...
Gazza
"PO1SON"
on wheels but just chucking in an idea...
Depending on the design/shape of the wheel, and annual polish may turn out to
be a major amount of work...
Gazza
"PO1SON"


Paint my wheels
OK so the thing I'm trying to prevent is oxidation and
pitting caused by water sitting on the alloy surface.
I'm Ok about giving the wheels a bit of a polish every three
months or so as long as I can get those marks off with metal
polish.
What do they do with those flash new polished wheels you can
buy? I thought that they must be protected in some way.
Could I use Silicone spray to protect them?
Don
pitting caused by water sitting on the alloy surface.
I'm Ok about giving the wheels a bit of a polish every three
months or so as long as I can get those marks off with metal
polish.
What do they do with those flash new polished wheels you can
buy? I thought that they must be protected in some way.
Could I use Silicone spray to protect them?
Don
1990 NA with a 1.8 conversion SOLD
2005 NC Limited edition 2470/3500 6MT
2005 NC Limited edition 2470/3500 6MT
Paint my wheels
traffic getting bad by avondale racecourse everymorning???good to see your
tops always down.,mike
tops always down.,mike
Who is online
Users browsing this forum: No registered users and 13 guests