Cruise control

[Rod Hiorns]

Hi, everyone.

I'm in the process of fitting 'factory' cruise control to my
Roadster, but I've run into 2 problems.

The accelerator pedal is different because the donor car was left
hand drive (from the US). Also, the wiper stalk I have is the
straight type, but the donor car had bent ones.

Does anyone know of any spares/wrecks/suppliers for these, or
have a broken cruise control and could swap out some bits?

Please get in touch (please cc me so I don't miss anything Cheers,
Rod

From MattGunn@newstalkzb.co.nz Fri Apr 27 15:53:47 2007
content-class: urn:content-classes:message
Subject: RE: Inlets and Exhaust.
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Date: Thu, 13 Dec 2001 06:42:55 +1300
Thread-Topic: Inlets and Exhaust.
Thread-Index: AcGCz0luIwEIRkJdSTmeWXc1zZuLdAALNoUQ
From: "Matt Gunn" <MattGunn@newstalkzb.co.nz>
To: "MX5List" <mx5list@mx5club.org.nz>
Precedence: list
Message-ID: <XVStdC.A.-U.DVXMGB@L733>

I think Darryl at Bitch'n performance ?(he subscribes to this list) can
order them. There are a number of shops in Auckland who stock them.

You can inprove air flow through vents on the pop up lights , but you'll
have to move some stuff. The other idea to keep cooler is to section off
the air intake with a shield. I've seen some good figures on subaru's.

cheers

MADMXV

From MattGunn@newstalkzb.co.nz Fri Apr 27 15:53:45 2007
content-class: urn:content-classes:message
Subject: RE: Cruise control
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Date: Thu, 13 Dec 2001 06:44:30 +1300
Thread-Topic: Cruise control
Thread-Index: AcGDMWzT4a5cBALERuWS5aVVoqR6CAANHJ5w
From: "Matt Gunn" <MattGunn@newstalkzb.co.nz>
To: "MX5List" <mx5list@mx5club.org.nz>
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <uSrg8D.A._U.DVXMGB@L733>

Are you 1600 cc or 1800 cc Rod ???

From badcat@xtra.co.nz Fri Apr 27 15:53:48 2007
User-Agent: Microsoft-Entourage/9.0.1.3108
Date: Thu, 13 Dec 2001 07:57:37 +1300
Subject: Re: Inlets and Exhaust.
From: "ken.newell" <badcat@xtra.co.nz>
To: mx5 list <mx5list@mx5club.org.nz>
In-Reply-To: <C5D98597AB0CD4489E676595849D4E490B54FF@chmx1.trn.co.nz>
Mime-version: 1.0
Content-type: text/plain; charset="us-ascii"
Precedence: list
Message-ID: <wbtgKC.A.AV.DVXMGB@L733>

Hi.
I have a trust airnx system. A custom fabbed heat sheild/airbox and a naca
ducted headlight.
That with a Jasma header, and a 2.52 exhaust work really well.
Anyone wants pictures - I can throw some on my website..
Ken


and a - On 13/12/01 6:42 AM, "Matt Gunn" <MattGunn@newstalkzb.co.nz> wrote:

I think Darryl at Bitch'n performance ?(he subscribes to this list) can

order

them. There are a number of shops in Auckland who stock them.

You can inprove air flow through vents on the pop up lights , but you'll

have
[...]

[Rod Hiorns]

Thanks for getting back to me, Matt.
It's a '95, 1.8 S-spec and the donor car was a '96 Miata.
Because of the US pars fiche I assumed 1600 & 1800 were the same:
http://www.mazdaformance.com/miataparts.htm
Let me know what you think.
Cheers,
Rod