SPS Motorsport

Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.

Moderators: LilRay.Sun, Furai, Growler, zorruno, jif

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Sun Mar 01, 2020 5:42 am

Here we have a new ND completely customized and wrapped in british racing green. The customer bought the new car from our Mazda dealer partner and we customized it.

Specs:
2020 MX-5 ND 184hp
SPS street coilover setup
Rays TE37 8x16" 25mm offset on 205/50 R15 Federal 595 RS-R
Stoptech Big Brake Kit
Recaro Pole Position
Customized steering wheel
Full exhaust with racing header and HJS 200 cells catalytic converter
wrapped in british racing green

Image

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Tue Mar 17, 2020 6:01 am

This Turbo NA is a more powerful version. A 1.8L BP with forged internals, a Garrett GT3071R turbocharger producing 320hp at the flywheel with 1.2 bar boost.

Some more specs:
Competition Clutch Stage 4
K-Sport coilover setup
StopTech Big Brake Kit
CAE short shifter on a 6-speed gearbox
Reroute Kit
Recaro Profi SPG seats
sparco seat harness
Nardi steering wheel
Rota Grids in 8x15 with 25mm offset
full 3" custom exhaust

Image

Image

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Thu Mar 26, 2020 11:36 pm

Hey guys,

we have a special offer for You.

We sell our TD04-Turbokit for the MX-5/Miata NA, NB and NBFL for just 3499€.
On the stock 1.6L You get 220hp at the flywheel, on the stock 1.8L You get 250hp at the flywheel.

The kit contains:
Kraken cast iron manifold
Two-piece downpipe (first part made of cast iron, second part made of stainless steel)
Turbocharger incl. Matching connection accessories
Steelflex oil feed pipe
water pipe
High temperature oil return
Giselwerks Hardpipe boost pressure piping
efficient intercooler
Open air filter
SPS Motorsport 700CC Injectors (calibrated and tested)
Engine control unit with matching basemap
mounting material (incl. spark plugs BKR7EIX and modified washer fluid reservoir)

https://www.youtube.com/watch?v=v18XYMgpjmU&t=0s

https://sps-motorsportshop.com/shop/en/ ... 98-SPECIAL

Best regards
Guido from SPS

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Tue Apr 07, 2020 7:49 pm

Hey guys,

just in case You didn't know. We make a sale for Japan Racing rims.
So every Japan Racing rim is 20% cheaper.

https://www.facebook.com/SPSMotorsport/ ... 929374217/

https://sps-motorsportshop.com/shop/en/ ... acing/?p=1

Best regards
Guido from SPS

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Thu May 14, 2020 6:51 pm

Hey guys,

here we have e really clean an nice looking NA with a Borg Warner EFR6258 turbo conversion on a stock 1.8L BP making 250hp. Also a very cool detail, the 7x14" Enkei RPF1 with 185/60 R14 Nankang NS-2R.

Specs:
- 1.8L BP with EFR6258
- ME221 ECU
- 3" exhaust system
- Enkei RPF1 7x14" 28mm offset with Nankang NS-2R 185/60 R14.
- Xtreme Clutch Stage 1
- BC Racing BR Series coilover setup
- Mishimoto performance radiator
- Sparco Sanremo steering wheel

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Sat May 16, 2020 7:08 pm

This is a really nice equipped MX-5 NC 2.0L. The car got some Recaro Pole Position mounted on our new developed seat brackets in combination with our new roll bar for the MX-5 NC and a 4-point harness. The car also got our SPS coilover setup, H&R anti-roll-bars, 17" OZ Ultraleggeras with Nankang NS-2R, a CarbonMiata Ducktail and a CAE Ultra Shifter.

Image

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Guido@SPS
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 30
Joined: Sat Apr 13, 2019 9:36 pm
Location: Altendiez

Re: SPS Motorsport

Post by Guido@SPS » Fri Jul 24, 2020 9:06 pm

Hey folks,

the last post was a few weeks ago. Now I have something new for You.

As You may know not only our customers drive MX-5s/Miatas, also some of our employees have them.

This is the car from our professional for all body work. It got a full Carbonmiata widebody kit which he installed by himself. The car also has a TD04 turbo conversion on its 1.8L BP making 250hp at the flywheel. To get the wheels (10,5x15 -13mm offset) fitted under the fenders he also installed camber arms on the rear axle together with our own SPS Super Low coilover setup. In the interior he installed a pair of Bride Low Maxx seats.

Image

Image

Image

Image

Image

Best regards
Guido from SPS

Post Reply

Return to “MX5 Discussion”

Who is online

Users browsing this forum: No registered users and 11 guests