Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
Junkwhale
- I have stars and not afraid to use them
- Posts: 242
- Joined: Mon Dec 16, 2013 2:19 pm
- Location: Wellington/Christchurch
Post
by Junkwhale » Fri Aug 08, 2014 8:24 pm
Timmo wrote:What causes springs to droop/uneven ride height?
I have mazda speed springs on Bilstein shocks. At the back, the ride height is uneven - I can fit about three fingers between the top of the tyre and the guard on the left side, whereas I can fit two fingers on the right side (when I'm not in the car obviously)- I've also just failed my warrant on ride height.
On mine the rubber upper and lower spring seats had perished to almost nothing which I imagine could account for a fingers difference if it's happened on one side only. Numbers 7 and 13 on here:
How much did it fail by/how low was it?
-
WideOpenThrottle
- I have stars, you haven't. Deal with it
- Posts: 1293
- Joined: Wed Dec 24, 2008 11:35 am
- Location: 36.8167° S, 174.4167° E
Post
by WideOpenThrottle » Sat Aug 09, 2014 9:11 am
Jesse Pinkman wrote:Hi all is it true that NB hubs will fit on an NA and are the NB hubs wider than the NA ones?, so if I wanted to fill the guards without getting new wheels or spacers could I get NB hubs? Cheers
http://www.miata.net/garage/compatibility.html
1989 NA 1650
1998 NB 1800
2005 NC 2000
1990 Landcruiser
Surfboard
Push-bike
Hiking shoes
-
Jesse Pinkman
- Tentative sideways sliding....
- Posts: 49
- Joined: Wed May 14, 2014 2:54 pm
- Location: Auckland
Post
by Jesse Pinkman » Sat Aug 09, 2014 6:08 pm
Thank you
Don’t confuse fame with success. Madonna is one; Helen Keller is the other.
Return to “MX5 Discussion”
Who is online
Users browsing this forum: No registered users and 111 guests