Window Washer Hoses & Clip Things
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
- I have stars, you haven't. Deal with it
- Posts: 1621
- Joined: Tue Feb 03, 2009 10:13 pm
- Location: At the pub
Window Washer Hoses & Clip Things
Where can I find some window washer hoses and black clip things that the hoses connect into? I've managed to destroy mine and need more to connect them back up to my washer bottle
-
- I have stars and not afraid to use them
- Posts: 239
- Joined: Sat Oct 01, 2011 9:26 am
- Location: Auckland, NZ
I recently replaced the tube on mine, just got it from Bunnings, the garden section I think... Anyway it was cheap.
There are whole new washer jets on TM for like $12, personally I need a 4mm Y hose connector for mine, not sure where to get that from though as I can only find T connectors - probably a wrecker or eBay and wait a week for it to turn up...
There are whole new washer jets on TM for like $12, personally I need a 4mm Y hose connector for mine, not sure where to get that from though as I can only find T connectors - probably a wrecker or eBay and wait a week for it to turn up...
I'm not crazy, my mother had me tested.
-
- I have stars, you haven't. Deal with it
- Posts: 1293
- Joined: Wed Dec 24, 2008 11:35 am
- Location: 36.8167° S, 174.4167° E
-
- I have stars, you haven't. Deal with it
- Posts: 1293
- Joined: Wed Dec 24, 2008 11:35 am
- Location: 36.8167° S, 174.4167° E
-
- I have stars and not afraid to use them
- Posts: 239
- Joined: Sat Oct 01, 2011 9:26 am
- Location: Auckland, NZ
Ha! Yeah that what mine did! Suddenly I had no water going to the driverside jet.Angreal wrote:Yeah I need the Y connectors. Mine went all brittle and then shattered
Well the ones on Fleabay are $11 shipped (from aus) I'll PM Ross and see what his are.
Rob you want one as well I assume?
I'm not crazy, my mother had me tested.
-
- I have stars and not afraid to use them
- Posts: 239
- Joined: Sat Oct 01, 2011 9:26 am
- Location: Auckland, NZ
I got 2m (only needed 1.5) of hose from Bunnings for $1.58 -unfortunatly the branch i used didn't have any Y connectors-
Ended up getting one from Repco for $10.
-Ross has em for $7 posted but i couldn't be bothered waiting.
Cleaned & realigned the jets while i was at it, oooh the power!
Ended up getting one from Repco for $10.
-Ross has em for $7 posted but i couldn't be bothered waiting.
Cleaned & realigned the jets while i was at it, oooh the power!
I'm not crazy, my mother had me tested.
-
- I have stars and not afraid to use them
- Posts: 202
- Joined: Wed May 14, 2008 4:31 pm
- Location: Christchurch
Right....
Available from Mazda and us(We are putting a couple into stock),$17.00+gst plus delivery.
Not cheap,for a bit of plastic.
Get them from the States for about $5.00usd.
We are looking to see if we can find a cheaper alternative from Taiwan,
will take a bit of time to find and arrange,would be sent with next shipment we have come over ,IF they make a alternative.
The trick with genuine factory ones is they do clip to the underside of the bonnet,so as to not move around,If that bothers you or not.
A stupid bit of plastic that everyone will need to replace eventually.
Available from Mazda and us(We are putting a couple into stock),$17.00+gst plus delivery.
Not cheap,for a bit of plastic.
Get them from the States for about $5.00usd.
We are looking to see if we can find a cheaper alternative from Taiwan,
will take a bit of time to find and arrange,would be sent with next shipment we have come over ,IF they make a alternative.
The trick with genuine factory ones is they do clip to the underside of the bonnet,so as to not move around,If that bothers you or not.
A stupid bit of plastic that everyone will need to replace eventually.
Here to help with any needs for your beloved MX5/Roadster.
-
- I have stars, you haven't. Deal with it
- Posts: 1621
- Joined: Tue Feb 03, 2009 10:13 pm
- Location: At the pub
Sweet. Looks like I know what I'm doing tomorrowtomtikki wrote:I got 2m (only needed 1.5) of hose from Bunnings for $1.58 -unfortunatly the branch i used didn't have any Y connectors-
Ended up getting one from Repco for $10.
-Ross has em for $7 posted but i couldn't be bothered waiting.
Cleaned & realigned the jets while i was at it, oooh the power!

-
- I am quitting my job and going 5-ing
- Posts: 619
- Joined: Tue May 23, 2006 9:42 am
- Location: North Shore
Have a look at the "Nice Products" catalogues here.
http://niceproducts.com.au/catalogues/w ... shpump.php
Davie Holden in Manukau are the agents and generally have good stocks. Their prices weren't too horrendous either.
http://niceproducts.com.au/catalogues/w ... shpump.php
Davie Holden in Manukau are the agents and generally have good stocks. Their prices weren't too horrendous either.
TG Sports, classic roadster - modern technology. NA1800, 99 head, 11:1 +2mm Wiseco pistons, Link LEM, Alloy f/wheel, JR headers.
Who is online
Users browsing this forum: No registered users and 24 guests