Hi, I got a newsletter from Personalised Plates today, they
are offering Euro plate style as a standard option.
http://www.plates.co.nz/index.phtml?pag ... euro.phtml
Regards,
Mike - Wellington / Upper Hutt MX5 Club Co-ordinator
http://www.mx5club.org.nz/events/wellington/ - RSVP ANY EVENTS YOU WILL ATTEND
04-970-9709 (home), 021-631-731, (text/cell)
Wellington, NZ
Personalised plates announce new euro plate style
Personalised plates announce new euro plate style
I was thinking a slimmer plate for the front of my car would be great, but these euro plates are only about 12mm slimmer than my current plates. I could easily achieve that by cutting off the border. Hmm, now where did I leave that power nibbler...
M@
M@
-
- Need, more, 5-ing, time....
- Posts: 100
- Joined: Sun Jun 04, 2006 3:24 pm
- Location: Wellington
Personalised plates announce new euro plate style
They need to be encouraged now to seek approval for a smaller style to suit
cars such as ours, and some of the exotica that need them...
On Tue, 19 Aug 2003 17:20:45 +1200, Mike Pearson - WYSIWYG Ltd wrote:
Hi, I got a newsletter from Personalised Plates today, they
are offering Euro plate style as a standard option.
http://www.plates.co.nz/index.phtml?pag ... euro.phtml
Regards,
Mike - Wellington / Upper Hutt MX5 Club Co-ordinator
http://www.mx5club.org.nz/events/wellington/ - RSVP ANY EVENTS YOU WILL ATTEND
04-970-9709 (home), 021-631-731, (text/cell)
Wellington, NZ
cars such as ours, and some of the exotica that need them...
On Tue, 19 Aug 2003 17:20:45 +1200, Mike Pearson - WYSIWYG Ltd wrote:
Hi, I got a newsletter from Personalised Plates today, they
are offering Euro plate style as a standard option.
http://www.plates.co.nz/index.phtml?pag ... euro.phtml
Regards,
Mike - Wellington / Upper Hutt MX5 Club Co-ordinator
http://www.mx5club.org.nz/events/wellington/ - RSVP ANY EVENTS YOU WILL ATTEND
04-970-9709 (home), 021-631-731, (text/cell)
Wellington, NZ
-
- Keep calm, Forum Moderator here.
- Posts: 1610
- Joined: Sun May 21, 2006 6:18 pm
- Location: In the Garage.
Personalised plates announce new euro plate style
Yup thats right.
when i lived in Sydney they had small front plates for
sportscars and euro's as an option. They were about
half the height and about 80% the length. If its good
enough for the NSW RTA then it has to be good enough
for the LTSA. Motorbike plates are small so whats the
difference when it comes to reading them when fitted
to cars? I heard that the NZ plates were made in Aus anyway. Is that true??
Glenn "SLYDIT" (just look out for garage walls!)
when i lived in Sydney they had small front plates for
sportscars and euro's as an option. They were about
half the height and about 80% the length. If its good
enough for the NSW RTA then it has to be good enough
for the LTSA. Motorbike plates are small so whats the
difference when it comes to reading them when fitted
to cars? I heard that the NZ plates were made in Aus anyway. Is that true??
Glenn "SLYDIT" (just look out for garage walls!)
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002
SCARING PRIUS DRIVERS SINCE 2002
-
- Need, more, 5-ing, time....
- Posts: 106
- Joined: Sat May 06, 2006 12:06 am
- Location: North Shore
Personalised plates announce new euro plate style
When I got my caption plates about 4-5 years ago thay had to have something
done to them in Australia. It was something to do with the capton lettering
and the border.
Mike
done to them in Australia. It was something to do with the capton lettering
and the border.
Mike
Who is online
Users browsing this forum: No registered users and 18 guests