SC

[Grant Schou]

Hi, looking for supplier of a check valve to insert in the 1/2"line between my air intake on my supercharger and the air inlet on the dummy throttle body - supposed to get an extra 1/2 psi boost .

Any help ?

Grant

[rotarypower]

ash air has them on the shore >glenn munro

Grant Schou wrote:

[...]

[lou Girardin]

I used a 1 way valve from a Chev ex- wreckers or you could try Ash Air Ltd in
Auck.

[SLYDIT]

"Hose supplies" has them as well. You can get brass
spring loaded check valves very cheaply, just check
that the spring is not too stiff. if it is then you
can simply unscrew the two halves and cut the spring
slightly to make it more forgiving.
Glenn

--- rotarypower <rotarypower@value.net.nz> wrote: >
ash air has them on the shore >glenn munro

Grant Schou wrote:

Hi, looking for supplier of a check valve to

insert in the 1/2"line between my air intake on my
supercharger and the air inlet on the dummy throttle
body - supposed to get an extra 1/2 psi boost .

Any help ?

Grant

-----------------------------------------------------------------------

This email contains confidential information. If

you have received this

email in error, please delete it immediately, and

inform us of the mistake

by return email. Any form of reproduction, or

further dissemination of

this email is strictly prohibited.
Also, note that the opinions expressed in this

email are those of the

author and are not necessarily those of the

Fonterra Co-operative Group

http://www.fonterra.com/

-----------------------------------------------------------------------