re[4]: jackson

Archives of Posts to the NZ MX5 List back in 2003
Locked
Mathew

re[4]: jackson

Post by Mathew » Tue Mar 25, 2003 12:44 pm

The $1400 was before GST so with that added, plus a mic for the knock sensor, and a hour or so on the Dyno for tuning I'm expecting it to be around 2k. Some of those timing control devices cost as much as 1k by the time you get them into the country. I'm not sure what you mean in your comment about low end torque.With timing set at 6deg it makes considerably more torque (everywhere) than a stock car. At 9deg it was making noticeably more again. I currently run on 98 and very rarely 96 when I'm not near one of the few stations that sell 98.

M@

lou Girardin

re[4]: jackson

Post by lou Girardin » Wed Mar 26, 2003 8:03 am

My comment on torque was relative, more than NA, less than with proper timing
advance. I believe the Bipes ACU would be around $500 landed. As far as I can
tell, the main advantage is a bit more top end than I have now.
The link is the way to go, but it works out at almost the cost of a coldside
kit.
Lou

Locked

Return to “2003”

Who is online

Users browsing this forum: No registered users and 10 guests