Fitting metal grill to MX5
Fitting metal grill to MX5
Does anyone know where to get a diagonal chrome wire weave grill like the
MGs, Jags et al have?
Adrian
MGs, Jags et al have?
Adrian
Fitting metal grill to MX5
Adrian
If you wanted to make something try your local stainless steel /
aluminium supplier (Mico metals etc). A few years ago and they had
'rolls' of stainless mesh (about 1.5m wide) and sell by the metre. They
had about 5 or 6 different 'sizes' ranging from a fine kitchen sieve up
to about 10-20mm square - obviously the wire gets thicker gauge as the
hole gets bigger.
Ian
If you wanted to make something try your local stainless steel /
aluminium supplier (Mico metals etc). A few years ago and they had
'rolls' of stainless mesh (about 1.5m wide) and sell by the metre. They
had about 5 or 6 different 'sizes' ranging from a fine kitchen sieve up
to about 10-20mm square - obviously the wire gets thicker gauge as the
hole gets bigger.
Ian
Fitting metal grill to MX5
Have a word with Ross Campbell. I've just fitted one of his vertical mesh
grills. Stainless mesh. Removed both the hooks & the factory lights. Looks
great. Brightens up the rather dark nose of the MX5.
Dr Bob
grills. Stainless mesh. Removed both the hooks & the factory lights. Looks
great. Brightens up the rather dark nose of the MX5.
Dr Bob
-
- Need, more, 5-ing, time....
- Posts: 102
- Joined: Fri May 19, 2006 12:43 pm
- Location: Upper Hutt
Fitting metal grill to MX5
I installed a grille in my 2000 model, very high quality stainless steel
diamond mesh (woven diagonal strands), similar to the one you see on the Jag
XKR, and it came from the USA. The fit and finish, delivery and installation
instructions, were absolutely first class. See
http://groups.msn.com/buckdiamond/_home ... rket=en-us for full
details and many pictures. The hardest part about fitting is removing the
tie-down hooks, which you have to do for 1989-2000 models: 2001 on have
their hooks further recessed so they don't have to be removed.
Tim
MY2CTA
diamond mesh (woven diagonal strands), similar to the one you see on the Jag
XKR, and it came from the USA. The fit and finish, delivery and installation
instructions, were absolutely first class. See
http://groups.msn.com/buckdiamond/_home ... rket=en-us for full
details and many pictures. The hardest part about fitting is removing the
tie-down hooks, which you have to do for 1989-2000 models: 2001 on have
their hooks further recessed so they don't have to be removed.
Tim
MY2CTA
Tim
MY2CTA
MY2CTA
Fitting metal grill to MX5
Ross said he had problems with the mesh falling apart or twisting.
The vertical and horizontal ones look good but I much prefer the diagonal
weave pattern.
Adrian
The vertical and horizontal ones look good but I much prefer the diagonal
weave pattern.
Adrian
-
- Need, more, 5-ing, time....
- Posts: 158
- Joined: Thu May 18, 2006 10:24 pm
- Location: Auckland city
Fitting metal grill to MX5
ross has them in chrome and black .
http://www.mx5mart.co.nz/db.cgi?
db=mart&uid=default&id=296&ww=on&view_records2=1
ken
[...]
http://www.mx5mart.co.nz/db.cgi?
db=mart&uid=default&id=296&ww=on&view_records2=1
ken
[...]
Fitting metal grill to MX5
Hi All; This is the mesh I have and want to use but when you cut it it
comes apart as its not welded.Ill have to weld it to the frame and then cut
it.It looks good though in stainless.Ross.
comes apart as its not welded.Ill have to weld it to the frame and then cut
it.It looks good though in stainless.Ross.
-
- See my 5 and raise you.
- Posts: 68
- Joined: Sun May 21, 2006 11:33 am
- Location: Newmarket (Auckland)
Fitting metal grill to MX5
I fitted this one to our car
www.lockwoodinternational.co.uk/grilles.htm
They're really dear to buy from here; put "Lockwood grille" into Google and
you'll find lots of people selling them. Ours came off eBay, less than half
price. Exceptional quality too.
www.lockwoodinternational.co.uk/grilles.htm
They're really dear to buy from here; put "Lockwood grille" into Google and
you'll find lots of people selling them. Ours came off eBay, less than half
price. Exceptional quality too.
Fitting metal grill to MX5
I have a cardboard template which I can copy for anyone who wants to make a
grill for the NA.
Carl
grill for the NA.
Carl
Fitting metal grill to MX5
Carl, your magic.
I was talking to a mate who's an engineer, he said he could obtain and cut
anything I wanted, but he would need a pattern.
Can I have a copy of yours please?
Thanks
Biff
ZOOM1N
I was talking to a mate who's an engineer, he said he could obtain and cut
anything I wanted, but he would need a pattern.
Can I have a copy of yours please?
Thanks
Biff
ZOOM1N
Fitting metal grill to MX5
I would love one thanks Carl.
You can send to:
Dave Kerr
91 McLeod Street
Upper Hutt, 6007.
Let me know the cost and I will send you some money for postage.
Dave.
You can send to:
Dave Kerr
91 McLeod Street
Upper Hutt, 6007.
Let me know the cost and I will send you some money for postage.
Dave.
Fitting metal grill to MX5
Dave you can use mine as a template, I'm just around the corner in Argyle
grove.
Ph 527 8000
Cheeers Jeff.
grove.
Ph 527 8000
Cheeers Jeff.
Who is online
Users browsing this forum: No registered users and 6 guests