Does anyone one know where to source;
a) 2 new rear KYB ref # 341127 &
b) 4 shock rubber boots for a good price.
... or even another 'ggod' brand of rear shocks
Thanks
Perry
[...]
KYB shocks & shock boots
KYB shocks & shock boots
Does anyone one know where to source;
a) 2 new rear KYB ref # 341127 &
b) 4 shock rubber boots for a good price.
... or even another 'ggod' brand of rear shocks
Thanks
Perry
[...]
a) 2 new rear KYB ref # 341127 &
b) 4 shock rubber boots for a good price.
... or even another 'ggod' brand of rear shocks
Thanks
Perry
[...]
-
- Need, more, 5-ing, time....
- Posts: 113
- Joined: Fri May 19, 2006 10:05 am
- Location: Manukau, NZ
KYB shocks & shock boots
Hi Perry,
You can just use some universal shock boots and trim them to suit from any
of the usual auto parts stores.
Anthony.
You can just use some universal shock boots and trim them to suit from any
of the usual auto parts stores.
Anthony.
KYB shocks & shock boots
Perry
I fitted KYB's to my 5 and I like them. They are KYB-AGX adjustable, via a
knob on the side. Part Numbers: Front NSL 741015 - Rear NSL 741016. I got
mine through TWL (Transport Wholesale Ltd) Sorry can't remember the price,
not cheap but very good for road work. Boots, I would only use Mazda parts
as the boot has an in built 'bump stop'. Mazda only stock rear ones as they
think that the front are the same but the bump stop is a different height.
You would have to order front ones from Japan. When I did mine the only boot
that needed changing was the rear left which I presume was because it is
below the fuel tank over flow, can't put it down to any other reason. KYB
site is worth a look www.kyb.com or got to the catalogue at
http://www.kyb.com/catalog/
NB: Part Numbers are for a 1996 NA
Good luck
Wayne
I fitted KYB's to my 5 and I like them. They are KYB-AGX adjustable, via a
knob on the side. Part Numbers: Front NSL 741015 - Rear NSL 741016. I got
mine through TWL (Transport Wholesale Ltd) Sorry can't remember the price,
not cheap but very good for road work. Boots, I would only use Mazda parts
as the boot has an in built 'bump stop'. Mazda only stock rear ones as they
think that the front are the same but the bump stop is a different height.
You would have to order front ones from Japan. When I did mine the only boot
that needed changing was the rear left which I presume was because it is
below the fuel tank over flow, can't put it down to any other reason. KYB
site is worth a look www.kyb.com or got to the catalogue at
http://www.kyb.com/catalog/
NB: Part Numbers are for a 1996 NA
Good luck
Wayne
KYB shocks & shock boots
What springs did you use with them Wayne?
93 1.8,intake/ex mods,Megasqirt PNP,torsen ,konis,GC coilovers,Nitto-01,cage,sparco seat,Schroth harness.
Who is online
Users browsing this forum: No registered users and 2 guests