1990 BRG mx5
with tan leather seats,but the driver seat has the colour worn off bottom
corner through sliding into the car.I have minimized this by always pushing
the seat to the rear before entering or leaving the car.I would like to know
if anyone has had there seats restored by these leather restorers you see
advertised,and do they make a good job,could any one recommend one In the
Hamilton,Auckland
area thanks
Vic
From chris.tankard@aderant.com Fri Apr 27 17:42:43 2007
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Subject: RE: rollbar thickness
Date: Fri, 27 Jan 2006 13:15:10 +1300
Thread-Topic: rollbar thickness
Thread-Index: AcYi1cxsJ7vy7FcFQLio2LsWrG79jgAAJ6AA
From: "Chris Tankard" <chris.tankard@aderant.com>
To: "MX5List" <mx5list@mx5club.org.nz>
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <rNMtBC.A.56G.XGZMGB@L733>
Hi Euen,
I am using a private contact - he is a fully certified welder and makes
numerous cages (with MANZ approval)- so everything should been OK there.
Herbert Fabrications are simply awesome - and I would use them without
hesitation if I had the $$$$. Cheap / affordable they are not.
C
From m.mccready@gmail.com Fri Apr 27 17:42:44 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com;
h=received:message-id
from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references;b=KeDczECUlvfwVy3NL4HKRpY/jVjY2EzyWMpxD73oK1biDxZ69PDJcnlItTVQPjWYFYaYrCJ7CCgLgbQTVAmdgMir7RqCh6ZphV30ZDbUfcUJgEevtXzXXQdtxnerJ9LSjmWi7d5gOitJEztJMf6AxTh4xF95vg4lPWJiizpa0gc=
Date: Fri, 27 Jan 2006 15:16:38 +1300
From: Mike McCready <m.mccready@gmail.com>
To: MX5List <mx5list@mx5club.org.nz>
Subject: Re: Forum vs list
In-Reply-To: <c868b35f0601230224v571844c6yfa70eaca402419bf@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
References: <20060123095150.KNXC18564.mta2-rme.xtra.co.nz@202.27.184.228>
<01cb01c62005$c2c9acc0$0200a8c0@simtronirb2io7>
<c868b35f0601230224v571844c6yfa70eaca402419bf@mail.gmail.com>
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <w1QL0C.A.66G.XGZMGB@L733>
Hi guys,
Just thought i'd add a possible solution to the forum vs email
thing. If you don't want the list mail coming in with your regular
mail you could set up an alternate address for the list. If anyones
interested I can offer an invite to gmail which easily copes with the
messages, plus you can download if you wish.
Mike
P.S. Sorry if i've covered someone elses suggestion but I hve only
been skimming over alot of the emails recently, more time needed i
think.
On 1/23/06, Jen Howes <justjen5@gmail.com> wrote:
[...]
