1.8l 1994 Miata na cranks but no spark

Discussions about MX5 Alarms, Car Stereos, Lighting, Batteries or other Electrical related issues

Moderators: Growler, jif, SLYDIT, brownie

Post Reply
Garethhirst7
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 1
Joined: Fri Aug 26, 2016 7:45 pm

1.8l 1994 Miata na cranks but no spark

Post by Garethhirst7 » Fri Aug 26, 2016 7:52 pm

Hey guys, I created an account to get some help because it seems likes I've tried everything and nothing has worked so far. Okay so I own a 1994 1.8l mx5 and since a couple days ago it won't start. It gets fuel, and cranks but there is no spark on the spark plugs. I have had the engine scanned and it sends a fault code 1. Igf/ne1 - signal - no input signal. I have changed the cas sensor to a working 1.6l 1989 cas and still no luck. I'm not sure where to go from here, anything will help at the moment. Thanks

2low2c
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 153
Joined: Thu Feb 28, 2008 8:35 pm
Location: north shore

Post by 2low2c » Sat Aug 27, 2016 10:31 am

Just out of interest have you checked the cam belt? otherwise it sounds like you might have a broken wire between the cas and the ecu.

JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Post by JaredH » Sun Aug 28, 2016 7:50 am

Just a guess, but could be worth testing the coilpack if the cas is fine?

Post Reply

Return to “MX5 Electrical, Audio, Alarms & Electronics”

Who is online

Users browsing this forum: No registered users and 9 guests