Sway Bar Links

Discussions relating to MX5 Tyre choice, Wheels, Brakes Suspension components and other items to keep you going around corners, stuck to the ground or stopping on a dime.

Moderators: Growler, jif, Born_disturbed, punkoutnz

Post Reply
PLSEME
See my 5 and raise you.
See my 5 and raise you.
Posts: 85
Joined: Mon Nov 27, 2006 12:17 pm
Location: Auckland

Sway Bar Links

Post by PLSEME » Fri Jun 22, 2007 10:53 pm

:D
Just about to fit some new sway bars & the links are looking alittle run down ,
Any ideas out there who to talk to or where to get the best deal :?:
Scientists now foresee the future will be much more futuristic than they first forswore
Top
Euen
I am quitting my job and going 5-ing
I am quitting my job and going 5-ing
Posts: 619
Joined: Tue May 23, 2006 9:42 am
Location: North Shore

Post by Euen » Fri Jun 22, 2007 11:27 pm

I cut out the old bushes and replaced them with Superpro ones from Stocks. They are an absolute P.I.T.A to get the old bushes out of as they are bonded in. I have heard of people burning them out but I (carefully) cut them out with a hole saw and then cleaned up the inside of the eye.

Cheers
Euen
TG Sports, classic roadster - modern technology. NA1800, 99 head, 11:1 +2mm Wiseco pistons, Link LEM, Alloy f/wheel, JR headers.
Top
Ian
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 439
Joined: Fri May 19, 2006 3:39 pm
Location: Arrowtown

Post by Ian » Sat Jun 23, 2007 9:48 am

I had my local suspension shop do mine (a kit of poly bushes, also from Stocks). My sus shop charged me $30 from memory.

I recently bought some adjustable links from the US, which enable the use of NA or NB bars in a NA chassis.

Cheers, Ian
93 1.8,intake/ex mods,Megasqirt PNP,torsen ,konis,GC coilovers,Nitto-01,cage,sparco seat,Schroth harness.
Top
GEEMCB
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 110
Joined: Sun May 21, 2006 2:12 pm
Location: Glendowie, Auckland

Post by GEEMCB » Sun Jun 24, 2007 9:10 pm

Would concur with Euan's comments - a pain to get the old bushings out. I used a bench vice, a selection of sockets & a considerable collection of swear words.

Also replaced with the superpro bushings from Stocks in Mt Wellington.

Have fun !
Greg
1990 V Special
Top
PLSEME
See my 5 and raise you.
See my 5 and raise you.
Posts: 85
Joined: Mon Nov 27, 2006 12:17 pm
Location: Auckland

sway bar links

Post by PLSEME » Mon Jun 25, 2007 8:49 pm

:D Thanx guys think ill give the boys at stocks a call & get me some of them bushes

Thanx :D
Scientists now foresee the future will be much more futuristic than they first forswore
Top
Post Reply

Return to “MX5 Suspension, Wheels, Tyres & Brakes etc”

Who is online

Users browsing this forum: No registered users and 11 guests