Discussions relating to MX5 Tyre choice, Wheels, Brakes Suspension components and other items to keep you going around corners, stuck to the ground or stopping on a dime.
Moderators: Growler, jif, Born_disturbed, punkoutnz
-
Donovan
- I only think 5.

- Posts: 917
- Joined: Tue Aug 10, 2010 10:05 pm
- Location: Auckland
Post
by Donovan » Thu Jun 02, 2011 7:03 pm
I have got in my pile of spare parts that I bought when I thought I was going to stick a rotary into my MX5, a Mazdaspeed mechanical LSD.
I think I have finally talked my brother into buying a MX-5 as well, and he is looking 1993 1.8L, which I said if he gets that he can have my LSD.
So I just want to make sure that it will work in it, as far as I know the gearbox and Diff are the same between the 1.6 and 1.8 NA?
-
last_resort14
- I have stars and not afraid to use them

- Posts: 252
- Joined: Tue Dec 30, 2008 1:27 pm
- Location: Hamilton
Post
by last_resort14 » Thu Jun 02, 2011 9:20 pm
Wont fit unfortunately, 1.6 has a 6 inch ring gear, 1.8 has 7 inch, housing and everything are larger
-
Donovan
- I only think 5.

- Posts: 917
- Joined: Tue Aug 10, 2010 10:05 pm
- Location: Auckland
Post
by Donovan » Thu Jun 02, 2011 9:44 pm
Bum, don't suppose I can swap the housing etc out from my 1.6 that will be all left over?
-
sprsta
- I have stars, you haven't. Deal with it

- Posts: 1024
- Joined: Mon Aug 25, 2008 6:11 pm
- Location: auckland
Post
by sprsta » Fri Jun 03, 2011 7:06 am
Yeah swap the whole thing, i think you need to swap the axles aswell.
It'll fit
-
Donovan
- I only think 5.

- Posts: 917
- Joined: Tue Aug 10, 2010 10:05 pm
- Location: Auckland
Post
by Donovan » Fri Jun 03, 2011 8:10 am
sprsta wrote:Yeah swap the whole thing, i think you need to swap the axles aswell.
It'll fit
Okey Dokey, it just so happens that I seem to have ended up with a spare diff, axles, drive shaft, gearbox, engine and the list goes on.
Hmm, maybe I should build a go kart instead and let my Brother fend for himself.
After all, he who dies with the most toys wins.
-
Donovan
- I only think 5.

- Posts: 917
- Joined: Tue Aug 10, 2010 10:05 pm
- Location: Auckland
Post
by Donovan » Fri Jun 03, 2011 11:33 am
Just another stupid question, if it is a 93 with a 1.8L in it, does that mean chances are it has been re-powered, as my mate Wiki on the internet say the 1.8 wasn't introduced till 94?
-
sprsta
- I have stars, you haven't. Deal with it

- Posts: 1024
- Joined: Mon Aug 25, 2008 6:11 pm
- Location: auckland
Post
by sprsta » Fri Jun 03, 2011 1:45 pm
-
brownie
- I count 5-s in my sleep

- Posts: 408
- Joined: Wed Mar 26, 2008 10:19 pm
- Location: CH CH
Post
by brownie » Sun Jun 05, 2011 9:14 pm
Late 93 is when Japan introduced the 1800,Bearing in mind the 1600 still continued to be available right thru to 03
-
SLYDIT
- Keep calm, Forum Moderator here.

- Posts: 1610
- Joined: Sun May 21, 2006 6:18 pm
- Location: In the Garage.
Post
by SLYDIT » Sun Jun 05, 2011 9:47 pm
check the chassis number it will say "NA8... "instead of "Na6..."
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002
-
Ian
- I count 5-s in my sleep

- Posts: 439
- Joined: Fri May 19, 2006 3:39 pm
- Location: Arrowtown
Post
by Ian » Tue Jun 14, 2011 9:36 pm
The Americans will try to tell you that no 1.8 NAs were produced in 1993 (I have a NZ new late 93 1.

, but this is because they have this weird practice of launching the next years 'model' half way through the previous year! As I have found when ordering parts from the US, rather than trying to educate them, I just tell them mine is a 94 and all is well......

93 1.8,intake/ex mods,Megasqirt PNP,torsen ,konis,GC coilovers,Nitto-01,cage,sparco seat,Schroth harness.
-
Donovan
- I only think 5.

- Posts: 917
- Joined: Tue Aug 10, 2010 10:05 pm
- Location: Auckland
Post
by Donovan » Tue Jun 14, 2011 9:58 pm
Well he bought it, and I have checked out the chassis number, and yup, it is a NA8C, so another one to the fold.
Return to “MX5 Suspension, Wheels, Tyres & Brakes etc”
Who is online
Users browsing this forum: No registered users and 12 guests