Here's some photos my brother took. Wasn't sure on blurring policy so I did a bit; My brother also took a bit of video which will be up later. http://farm9.staticflickr.com/8381/8473323314_6c51b7f057_b.jpg http://farm9.staticflickr.com/8389/8473324492_12c79e5a99_b.jpg http://farm9.staticflickr.com/8...

Tempting.... though I will probably be thoroughly left behind =P

I just impulse purchased this on trademe... For fitting a 77m neck pod filter to vane type Air flow meters with bolt spacing of 82mm x 37mm and square centre hole Common fitment is Mazda 323, familia, MX5 & Many model BMW. Also fits some Toyota such as SW20 MR2 Turbo and Camry http://images.trademe...

Cool it's right near work =]

siren676 wrote:Painted and installed rollbar

Where'd you get the rollbar from if I may ask?

Yea, the HSDs are a shorter unit to begin with so once they're in they should be easy to take out. The factory ones are really the only issue. Not sure if I should try find some spring compressors just in case removal goes tits up and I need to try shorten the factory shock. Not gonna be getting the...

Hardest bit to remove I found was the long bolts for the upper wishbone, I'd definitely give them a good pre-soaking! Didn't think I'd need to remove the upper wishbone? Thought I could get away with just unbolting the swaybar link and levering the whole lower wishbone down. Do need to get some spr...

Could be keen.
Is this just the bottle? Just wanna know if I'm going to have to run to the bolt shop or not.

Hey all, kinda new to the forum. Long time listener, first time caller type thing.

Changed diff fluid yesterday on my 91 NA6 =]
Started spraying CRC on to the bottom shock bolts in prep of replacing the shocks with some HSD coilovers.