yup got mine from ebay - robbins budget top was about 150usd free shipping in usa then used youpost to get it here for under 300nzd all up delivered same ones as on tardme for $600nzd or more miata/mx5/eunos all the same top nb roof frame is slightly different some good guides to fitting on miata.ne...

yup its dead nzmx5 page is pretty well moderated but does have a lot of hurr durr sell me lowered springs and a hardtop plz ftp posts some very clued up people on there too but i suspect they were here a while back too meearta.net has all the info anyway and mx5nutz in the uk has the english transla...

seen that their engine mounting all off the rear adaptor plate idea looks dodgy as ...and looks like the engine sits quite far forward there is a few dozen threads on miata.net about them Chev LFX v6 swap looks better and this looks and sounds even better http://www.rocketeerltd.com/ Jag/ford/mazda/...

have you looked at proboards or v-bulletin?
some forums are terrible to use esp with tapatalk
this one is ok just has a 90s feel

there is something on miata .net about later hardtops having different locating nipples in the front clamps .. not the not the whole clamp just the bit that locates into the windscreen header they are replacable but you need to remove the latch to see how

Make sure you run it long enough for the fan to run and the thermostat to open when you are refilling
Avoid getting an airlock they seem a bit fussy on this

Yes youshop is easy just gotta check their weights / dimensions on what you are getting small packages = great sometimes sellers have a better shipping deal like i got set of 4 disc rotors and pads shipped by an ebay seller to nz for 25nzd freight and 1 rear caliper thru youshop was 65nzd freight ju...

Cheapy carbon from tardme
heavier and shorter than the factory woody

never gets too hot or cold and has alloy insert for thread

Today ... well last week actually i borrowed a hoist and did this new rotors pads and one new rear caliper http://i295.photobucket.com/albums/mm123/albionhome/mx5/IMG_0488.jpg http://i295.photobucket.com/albums/mm123/albionhome/mx5/IMG_0487.jpg And the week before i fitted these old skool Autosport ...

recent arrivals "Genuine" MOMO Italy alloy handbrake cover direct from aliexpress China lol Goes well with the Fauxcarbon tardme gearknob .. the wood set in the all black interior was just odd http://i295.photobucket.com/albums/mm123/albionhome/mx5/IMG_0462.jpg http://i295.photobucket.com/albums/mm1...

Well due for a cambelt no record of it being done so its on the list
Body is 200000km motor is unknown as its a long nose crank replacement at some point not the 1989 original

Today I went from this.... http://i295.photobucket.com/albums/mm123/albionhome/mx5/IMG_0283.jpg To this http://i295.photobucket.com/albums/mm123/albionhome/mx5/IMG_0284.jpg 3 day weekends are great .. nice drive to the beach with the top down Time to find some shocks that are not 200000km old to imp...

Arrived yesterday installed and tested today
New clutch master and slave cylinders from Broomfish.co.nz
Great price fast delivery excellent service thanks
Clutch has never been so good

Just checked the wheels i have on and they are 14x6 38p offset made in japan and stamped 5.5 kg
looking better now i may paint them til a bargain pops up

Moved house ......

Yes a weight on the Lenso PDJ wheel would be great if anyone has/can get that info..

BRM wrote:Them lensos look cool.

+20 would need a roll?

I think we sell them now

You sell them at the same price?
Any other options available ? like 15x7 or different offset?

How much was shipping from japan ? through moonlight or private? If i find some nice 14x6 or 6.5 or 7 in good offset im in Roads are bad enough down here that i dont want to lower much or go to low profile tyres A little lower and a little fatter filling the guard would be nice without making an ill...

Ah damn i was liking the look of these but they only seem to be in 20p offset http://www.trademe.co.nz/motors/car-parts-accessories/wheels-tyres/alloy-wheels/auction-762872353.htm Lenso good bad or ugly ? too heavy? Yes i have heard about this 15 x 8 being like the sheep trail and 15x 7 is sounding ...

Yup looking at all the options -- spacers or adaptors and cert is not an option yes i am looking at better shocks/ springs but again nothing that needs cert as i will soon be living in a place far far away from any cert testing facilities and my car is a daily driver until its warmer and i can use t...

OK on the cert thing .. im not going there I put a V8 hilux thru LVV and never again So are height adjustable shocks require cert too ? i should go reread the pages of rules for cert I have been looking at some basic KONIs on flying miata that have a clip to run the stock springs at 3 heights And oh...

Hello and welcome Get a NZpost youshop address in the usa if you wanna buy from the forums over there most people cant be bothered sorting shipping to NZ That cheap hardtop in chch went for the buynow of 800 within hours of being listed Softtop cover and rainrail will cost you $300 odd nzd + shippin...

Okay im starting to look at some better wheels for my NA mx5 Have the basics that its 4x100 and about 45 offset and its on 14 x 6 at the moment also that lightweight is a must have for these cars Have looked at lots of stuff online at miataturbo and miata.net and at offset calculators and stuff Reas...

Today and well this week I have been enjoying driving my MX5 without a damp drivers seat and soggy carpet .... New roof and adjusted drivers window is awesome But i still dont feel like a hairdresser while blasting along the buller gorge listening to Motorhead on the factory cassette deck ... I have...

yup the prices i see on trademe for the exact same item make hardtops look cheap