Radiator Cooling Panel

Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.

Moderators: LilRay.Sun, Furai, Growler, zorruno, jif

REDBEN
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 381
Joined: Sat May 26, 2012 11:22 pm
Location: West Harbour, Auckland

Radiator Cooling Panel

Post by REDBEN » Sat Nov 09, 2013 5:36 pm

Hey Guys,

How many of you would be interested in a Radiator cooling panel (Like the one in the photo?

Image

I have drawn up my own for production, let me know what you guys think.


Image

Possible next group buy?

Cheers

REDBEN
1991 NA6 Mariner Blue with a twist of BP

Brainflex
See my 5 and raise you.
See my 5 and raise you.
Posts: 83
Joined: Wed May 11, 2011 8:53 pm
Location: Whakatane

Post by Brainflex » Sat Nov 09, 2013 5:42 pm

Price?

siren676
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1115
Joined: Fri Jun 08, 2012 12:21 am
Location: Auckland

Post by siren676 » Sat Nov 09, 2013 5:51 pm

Keen dependant on price.

:lol: if you keep these group buys up theres going to be 10 or so mx5's in nz with all the same parts
1990 NA6C MX5

REDBEN
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 381
Joined: Sat May 26, 2012 11:22 pm
Location: West Harbour, Auckland

Post by REDBEN » Sat Nov 09, 2013 6:07 pm

Brainflex, I will have a price next week, then will let you know.

Siren676, then everyone will have good quality gear on there MX5's 8)
1991 NA6 Mariner Blue with a twist of BP

MrGrey
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1172
Joined: Mon Jan 21, 2013 3:52 am
Location: Northland

Post by MrGrey » Sat Nov 09, 2013 7:36 pm

when you consider the vast sea of stock MX5 driving around, a few with quality mods is a good thing in my books :)

Furai
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1394
Joined: Tue Feb 14, 2012 5:57 pm
Location: New Zealand

Post by Furai » Sat Nov 09, 2013 8:08 pm

In. Dont have enough foam to redo mine anyway

brownie
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 408
Joined: Wed Mar 26, 2008 10:19 pm
Location: CH CH

Post by brownie » Sat Nov 09, 2013 8:58 pm

not saying i will buy one,But interested all the same.
What were you looking at making them from ?,
Tin,Alloy,Stainless Steel ? maybe a mixture,I could see a tin or alloy being easy to vinyl wrap and quite cheap to produce but stainless looking classy and a bit more hardy long term.

Waiting with interest,my factory plastic one is a bit boring to look at,and quite flimsy

MrGrey
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1172
Joined: Mon Jan 21, 2013 3:52 am
Location: Northland

Post by MrGrey » Sat Nov 09, 2013 10:00 pm

treadplate wrapped in CF vinyl looks amazing... but treadplate can be a bit expensive. I also recommend rubberized door trim for where the plate contacts the chassis (its the stuff you put on to the door frame to seal/absorb slams and its cheap)
Image

Joel
See my 5 and raise you.
See my 5 and raise you.
Posts: 82
Joined: Thu Apr 11, 2013 10:44 pm

Post by Joel » Sat Nov 09, 2013 11:33 pm

Wouldn't mind a bit more shine under the hood, my radiator is looking a little outta place.

CordedBowl
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 334
Joined: Fri Jul 13, 2012 5:12 pm

Post by CordedBowl » Sun Nov 10, 2013 9:22 am

Keen!

NicF
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 185
Joined: Tue Feb 12, 2013 12:00 pm
Location: Sth Canterbury

Post by NicF » Sun Nov 10, 2013 11:10 am

I'd be up for one.
99 NB MX5
91 NA MX5
92 B2600 offroad
Because RWD is ALWAYS more fun

REDBEN
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 381
Joined: Sat May 26, 2012 11:22 pm
Location: West Harbour, Auckland

Post by REDBEN » Fri Nov 15, 2013 1:36 pm

A sneak peak at our new MX5 cooling panel finished for test fitting tomorrow along side with our Hardtop fitting brackets no more latches.

Image

Image
1991 NA6 Mariner Blue with a twist of BP

ch4ng
See my 5 and raise you.
See my 5 and raise you.
Posts: 60
Joined: Tue Apr 30, 2013 12:57 pm
Location: Auckland

Post by ch4ng » Fri Nov 15, 2013 6:13 pm

I'll be interested in a set of hard top latches. You'll have one for the side mounts too?
El Tigre NA6T
No Limits Onsite Paint Repairs
Cut & polishing, stone chips, scratch repairs 021-177-8539 Mention MX5Forum

PLSEME
See my 5 and raise you.
See my 5 and raise you.
Posts: 85
Joined: Mon Nov 27, 2006 12:17 pm
Location: Auckland

Post by PLSEME » Sat Nov 16, 2013 9:52 am

+ 1 for a set of Hard top fitting brackets :D

Price :?: :?: :?:
Scientists now foresee the future will be much more futuristic than they first forswore

fooesboy
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 117
Joined: Wed Feb 20, 2013 11:44 am
Location: Te Aroha, New Zealand

Post by fooesboy » Sat Nov 16, 2013 4:33 pm

I am interested in the price of the cooling panel as well please.

Brainflex
See my 5 and raise you.
See my 5 and raise you.
Posts: 83
Joined: Wed May 11, 2011 8:53 pm
Location: Whakatane

Post by Brainflex » Sat Nov 16, 2013 7:56 pm

package price for cooling panel n hardtop brackets!

CordedBowl
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 334
Joined: Fri Jul 13, 2012 5:12 pm

Post by CordedBowl » Sat Nov 16, 2013 11:56 pm

Prototype :D
Image

brownie
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 408
Joined: Wed Mar 26, 2008 10:19 pm
Location: CH CH

Post by brownie » Sun Nov 17, 2013 10:26 pm

looking good,
whats the build spec ?,ie,whats the metal,how thick ?

REDBEN
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 381
Joined: Sat May 26, 2012 11:22 pm
Location: West Harbour, Auckland

Post by REDBEN » Mon Nov 18, 2013 7:44 pm

brownie wrote:looking good,
whats the build spec ?,ie,whats the metal,how thick ?
Hey Brownie!

We have made templates out 1.6mm Aluminium which look quite nice also also a bit of flex in the plate. Being Aluminium its fairly light and can be wrapped in 3M wrapping for those that want black ones etc. We are currently finalizing the design and fixture locations but expect the final design price to be around $45 Dollars + Shipping.

Included will be a soft rubber lip to go around back side of the plate to minimize any vibration noise and provide a good seal against the Radiator itself.

Below are some photo's of the proto-type.


Ben


Image

Image
1991 NA6 Mariner Blue with a twist of BP

REDBEN
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 381
Joined: Sat May 26, 2012 11:22 pm
Location: West Harbour, Auckland

Post by REDBEN » Mon Nov 18, 2013 8:37 pm

If you guys a happy with the initial design could you please give me an indication of interest:

1. Siren676
2. Furai
3. Brooke5
4. MattBRG
5. Cordedbowl
6. Brownie
7. Brainflex
8.
9.
10.
11.
12.
13.
14.
15.
Last edited by REDBEN on Wed Nov 20, 2013 7:33 am, edited 5 times in total.
1991 NA6 Mariner Blue with a twist of BP

MattBRG
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 28
Joined: Sun Mar 31, 2013 1:42 pm
Location: the mountain of love

Post by MattBRG » Mon Nov 18, 2013 8:40 pm

REDBEN wrote:If you guys a happy with the initial design could you please give me an indication of interest:

1. Siren676
2. Furai
3.MattBRG

CordedBowl
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 334
Joined: Fri Jul 13, 2012 5:12 pm

Post by CordedBowl » Mon Nov 18, 2013 8:49 pm

Keen!

brownie
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 408
Joined: Wed Mar 26, 2008 10:19 pm
Location: CH CH

Post by brownie » Mon Nov 18, 2013 11:40 pm

REDBEN wrote:If you guys a happy with the initial design could you please give me an indication of interest:

1. Siren676
2. Furai
3. Brooke5
4. MattBRG
5. Cordedbowl
6.Brownie
7.
8.
9.
10.
11.
12.
13.
14.
15.

Brainflex
See my 5 and raise you.
See my 5 and raise you.
Posts: 83
Joined: Wed May 11, 2011 8:53 pm
Location: Whakatane

Post by Brainflex » Tue Nov 19, 2013 6:47 pm

1. Siren676
2. Furai
3. Brooke5
4. MattBRG
5. Cordedbowl
6. Brownie
7. Brainflex + hardtop brackets!
8.
9.
10.
11.
12.
13.
14.
15.
_________________

Snapfrozen
I am quitting my job and going 5-ing
I am quitting my job and going 5-ing
Posts: 747
Joined: Sun Jun 24, 2012 11:58 am

Post by Snapfrozen » Sat Nov 23, 2013 4:43 pm

1. Siren676
2. Furai
3. Brooke5
4. MattBRG
5. Cordedbowl
6. Brownie
7. Brainflex + hardtop brackets!
8. Snapfrozen + hardtop brackets!
9.
10.
11.
12.
13.
14.
15.

Post Reply

Return to “MX5 Discussion”

Who is online

Users browsing this forum: No registered users and 14 guests